Utilizamos cookies para ayudarle a navegar de manera eficiente y realizar ciertas funciones. Encontrará información detallada sobre todas las cookies en cada categoría de consentimiento a continuación.
Las cookies clasificadas como "Necesarias" se almacenan en su navegador ya que son esenciales para habilitar las funcionalidades básicas del sitio....
Las cookies funcionales ayudan a realizar ciertas funciones, como compartir el contenido del sitio web en plataformas de redes sociales, recopilar comentarios y otras funciones de terceros.
Las cookies analíticas se utilizan para comprender cómo interactúan los visitantes con el sitio web. Estas cookies ayudan a proporcionar información sobre métricas como el número de visitantes, la tasa de rebote, la fuente de tráfico, etc.
Las cookies de rendimiento se utilizan para comprender y analizar los índices clave de rendimiento del sitio web, lo que ayuda a ofrecer una mejor experiencia de usuario a los visitantes.
Las cookies publicitarias se utilizan para proporcionar a los visitantes anuncios personalizados basados en las páginas que visitó anteriormente y para analizar la efectividad de las campañas publicitarias.
Paloma Matia, optical engineer at ASE Optics, will give a poster presentation entitled: “Technology trade-off for remote lithium jet thickness monitoring system” at the International Symposium on Fusion Nuclear Technology (ISFNT) event on the DONES-FLUX project for IFMIF-DONES (CDTI Missions MIP-20221017), in which a lithium foil thickness monitoring system is being developed. The system will be designed to perform live 3D measurements with a depth resolution of 0.1 mm over the flowing lithium foil area of IFMIF-DONES of about 100 cm2. It will be used as part of the active control of the lithium foil flow parameters and the IFMIF-DONES interlocking system. The technology will be compatible with the applicable environmental conditions of radiation, vacuum and temperature, and with the applicable geometric restrictions of IFMIF-DONES. In these early design phases, a technology trade-off is presented for this measurement system that will be used to guide the design to TRL4 by the end of 2024.